The Low Energy Lead Block Kit consists of 14 pre-shaped clinical lead blocks to be used with photon energies greater than 6MV. All surfaces are covered with white powder-coat paint. Each block is 8 cm thick (NCRP Report No. 102: thickness of lead required to reduce beam to 5%). The provided screws allow the blocks to be attached to standard 3/8″ beam block trays. The eye blocks are attached to the beam block trays with a single screw. All other lead blocks are attached with two screws. The system weighs 30 lbs.
System consists of: |
|
Qty 2 |
Semicircular (kidney) – 50mm diameter |
Qty 2 |
Square – 50mm x 50mm |
Qty 2 |
Square (spinal cord) – 13mm x 100mm |
Qty 4 |
Triangular – 40mm x 40mm |
Qty 2 |
Circular (eye) – 10 mm diameter |
Qty 2 |
Rectangular – 25mm x 80mm |
Qty 11 |
Standard Thumb Screws – 8/32 x ¾” |
Qty 4 |
Eye Block Thumb Screws – 8/32 x ½” |
Ask a question about this productTechnical Specifications
Material |
Lead |
Surface |
Whit powder-coat paint |
Quantity |
14 blocks |
Thickness |
80 mm |
Suggested Photon Energies |
greater than 6 MV |